LOVE.NAECO.COM POLYNEXT
English
Spanish

Materials

Find out about our polymer grades

At Naeco Recycling, we are convinced it is not always the most expensive material that is the most suitable for all applications: rather, it is necessary to find the one whose mechanical, ecological, and economic yield is the most efficient for a specific application. Therefore, according to the requirements of the product and/or application, it is possible to select from various options and kinds of material depending on the polymer required.

Polypropylene

c PP-E – Recycled polypropylene packaging

cPP-E is a recycled polypropylene (PP) pellet developed from the recycling of post-consumer packaging for injection applications and with a medium fluidity. By default, the color of the material is gray (variable over time) and there is the possibility of making certain colors on demand. We also have other alternative references that improve impact resistance, increase fluidity or incorporate talc (cPP-EM, cPP-EF20, cPP-EF40, cPP-ET10, cPP-ET20).
Possible applications: Injection parts such as boxes, pallets, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 °C / 2,16 kg) 7 - 12 g/10 min
Density ISO 1183 0,91 - 0,93 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.000 - 1.200 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >8 %
Impact resistance Charpy with notch (23ºC) ISO 179‐1/1eA >4 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-EM – Improved packaging recycled polypropylene

cPP-EM is a recycled polypropylene (PP) pellet formulated from post-consumer packaging waste designed for injection applications where greater impact resistance is required. By default, the color of the material is gray (variable over time) and there is the possibility of making certain colors on demand. The following related products are available: cPP-E, cPP-EF20, cPP-EF40, cPP-ET10, cPP-ET20.
Possible applications: Injection parts such as boxes, pallets, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 °C / 2,16 kg) 7 - 12 g/10 min
Density ISO 1183 0,91 - 0,93 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/1 950 - 1.100 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >10 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA >5 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-EF20 – Recycled polypropylene from packaging with MFI 20

cPP-EF20 is a recycled polypropylene (PP) pellet formulated from post-consumer packaging waste, which has a fluidity between 15 and 25. Formulated for injection applications where a high MFI index is required. By default, the color of the material is gray (variable over time) and there is the possibility of making certain colors on demand. Other related materials are: cPP-E, cPP-EM, cPP-EF40, cPP-ET10, cPP-ET20.
Possible applications: Injection parts such as boxes, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230ºC / 2,16 kg) 15 - 25 g/10 min
Density ISO 1183 0,91 - 0,93 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.000 - 1.200 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 <10 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 3 - 4 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-EF40 – Recycled polypropylene from packaging with MFI 40

cPP-EF40 is a recycled polypropylene (PP) pellet formulated from post-consumer packaging waste, which has a fluidity between 35 and 45. Formulated for injection applications where the maximum MFI index is required. By default, the color of the material is gray (variable over time) and there is the possibility of making certain colors on demand. Other related materials are: cPP-E, cPP-EM, cPP-EF20, cPP-ET10, cPP-ET20.
Possible applications: Injection parts such as boxes, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230ºC / 2,16 kg) 35 - 45 g/10 min
Density ISO 1183 0,91 - 0,93 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.000 - 1.200 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 >17 MPa
Elongation at break to traction ISO 527-2/1A/50 <10 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 3 - 4 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-CP – Recycled polypropylene copolymer

cPP-CP is a copolymer polypropylene (PP) pellet developed from different sources of post-consumer waste. A very versatile plastic material with excellent mechanical properties. Designed for injection processes of various parts. The color of the material is black. In the catalog there are variants added with talc, such as cPP-CPT10 and cPP-CPT20.
Possible applications: Injection parts such as boxes, pallets, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 ºC / 2,16 kg) 7 - 15 g/10 min
Density ISO 1183 0,91 - 0,93 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.000 - 1.200 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >10 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 6 - 8 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-V – Injection recycled polypropylene

cPP-V is a polypropylene (PP) pellet developed from different sources of post-consumer waste classified by typology. It is a versatile material designed for injection processes of various parts. The color of the material is black. There are versions with talc: cPP-VT10 and cPP-VT20.
Possible applications: Injection parts such as boxes, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 °C / 2,16 kg) 15-25 g/10 min
Density ISO 1183 0,91 - 0,94 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A-1 1.000-1.200 MPa
Resistance at the tensile yield point ISO 527-2/1A/1 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >10 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 3-5 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

Polypropylene with talc

c PP-ET10 – Recycled polypropylene packaging 10% Talc

cPP-ET10 is a recycled polypropylene (PP) pellet developed for injection applications. Added with talc, it allows giving rigidity and dimensional stability to the injected pieces. By default, the color of the material is gray (variable over time) and there is the possibility of making certain colors on demand. There are other materials related to this reference such as cPP-E, cPP-EM, cPP-EF20, cP-EF40, cPP-ET20.
Possible applications: Containers, bigbox, pallets.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 °C / 2,16 kg) 7 - 12 g/10 min
Density ISO 1183 0,98 - 1,00 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.250 - 1.400 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >5 %
Impact resistance Charpy with notch (23ºC) ISO 179‐1/1eA 3 - 4 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-ET20 – Recycled polypropylene packaging 20% Talc

cPP-ET20 is a recycled polypropylene (PP) pellet developed for injection applications. Added with talc, it allows giving rigidity and dimensional stability to the injected pieces. By default, the color of the material is gray (variable over time) and there is the possibility of making certain colors on demand. There are other materials related to this reference such as cPP-E, cPP-EM, cPP-EF20, cPP-EF40, cPP-ET10.
Possible applications: Injection parts such as boxes, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 °C / 2,16 kg) 7 - 12 g/10 min
Density ISO 1183 1,034 - 1,06 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.500 - 1.700 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >5 %
Impact resistance Charpy with notch (23ºC) ISO 179‐1/1eA 3 - 4 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-CPT10 – Recycled polypropylene copolymer 10% Talc

cPP-CPT10 is a copolymer polypropylene (PP) pellet developed from different sources of post-consumer waste. It is a composite material with additives with a mineral load of 10% talc. Designed for injection processes of various parts where a high demand for material stability or improvement in the appearance of the finished product is required. The color of the material is black. In the catalog there are related products, such as the cPP-CP and cPP-CPT20.
Possible applications: Injection parts such as boxes, pallets, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 °C / 2,16 kg) 7 - 15 g/10 min
Density ISO 1183 0,98 - 1,00 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/1 1.250 - 1.400 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >5 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA >5 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-CPT20 – Recycled polypropylene copolymer 20% Talc

cPP-CPT20 is a copolymer polypropylene (PP) pellet developed from different sources of post-consumer waste. It is a composite material with additives with a mineral load of 20% talc. Designed for injection processes of various parts where there is a high requirement for material rigidity and stability. The color of the material is black. In the catalog there are related products, such as the cPP-CP and cPP-CPT10.
Possible applications: Injection parts such as boxes, pallets, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 ºC / 2,16 kg) 7-15 g/10 min
Density ISO 1183 1,04 - 1,06 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.500 - 1.700 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >5 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA >4 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-VT10 – Recycled injection polypropylene 10% Talc

cPP-VT10 is a polypropylene (PP) pellet developed from different sources of post-consumer waste classified by typology. It is an additive composite material with a mineral load of 10% talc that has been developed for injection processes of various parts that require better appearance (reducing sinkholes) and dimensional stability. The color of the material is black. There is a version without talc (cPP-V) and with 20% talc (cPP-VT20).
Possible applications: Injection parts such as boxes, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 ºC / 2,16 kg) 15-25 g/10 min
Density ISO 1183 0,98 - 1,00 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.250 - 1.400 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >5 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 3 - 4 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c PP-VT20 – Recycled injection polypropylene 20% Talc

cPP-VT20 polypropylene (PP) pellets developed from different sources of post-consumer waste classified by typology. It is an additive composite material with a mineral load of 20% talc that has been developed for injection processes of various parts that require greater rigidity and dimensional stability. The color of the material is black. There is a version without talc (cPP-V) and with 10% talc (cPP-VT10).
Possible applications: Injection parts such as boxes, buckets, pots, furniture and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (230 ºC / 2,16 kg) 15 - 25 g/10 min
Density ISO 1183 1,04 - 1,06 g/cm3
Shore D hardness ISO 868 62 - 66

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 1.500 - 1.700 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >5 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 3 - 4 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

Polyethylene high density

c HDPE-I – Standard recycled high-density polyethylene for injection

cHDPE-I is a high-density polyethylene (HDPE) pellet developed from a consumer waste source. It is a stable material, with regular availability and good performance, developed for injection transformation processes. The color of the material is black.
Possible applications: Injection parts such as boxes, pallets and consumer items.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190ºC / 2,16 kg) 4 - 6 g/10 min
Density ISO 1183 0,94 - 0,96 g/cm3
Shore D hardness ISO 868 60 - 64

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/A 950 - 1.050 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 >22 MPa
Elongation at break to traction ISO 527-2/1A/50 >200 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 4 - 5 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c HDPE-ICG – Gray injection recycled high-density polyethylene

cHDPE-ICG is a medium gray high-density polyethylene (HDPE) pellet for injection processes. It is a high-quality material with stable behavior, ideal for replacing or complementing productions with virgin materials. One of the most frequent applications is the production of containers and boxes. This reference is also available in green (CHDPE-ICV) and black (cHDPE-ICN).
Possible applications: Containers, bigbox, pallets.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190ºC / 2,16 kg) 3 - 5 g/10 min
Density ISO 1183 0,94 - 0,96 g/cm3
Shore D hardness ISO 868 60 - 64

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/A 850 - 950 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >400 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 5 - 6 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c HDPE-ICV – Green injection recycled high-density polyethylene

cHDPE-ICV is a green high-density polyethylene (HDPE) pellet for injection processes. It is a high-quality material with stable behavior, ideal for replacing or complementing productions with virgin materials. One of the most frequent applications is the production of containers and boxes. Esta referencia está disponible también en color gris (CHDPE-ICG) y negro (cHDPE-ICN).
Possible applications: Containers, bigbox, pallets.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190ºC / 2,16 kg) 3 - 5 g/10 min
Density ISO 1183 0,94 - 0,96 g/cm3
Shore D hardness ISO 868 60 - 64

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/A 850 - 950 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >400 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 5 - 6 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c HDPE-ICN – Black injection recycled high-density polyethylene

cHDPE-ICN is a black high-density polyethylene (HDPE) pellet for injection processes. It is a high-quality material with stable behavior, ideal for replacing or complementing productions with virgin materials. One of the most frequent applications is the production of containers and boxes.
This reference is also available in gray (CHDPE-ICG) and green (cHDPE-ICV).
Possible applications: Containers, bigbox, pallets.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190ºC / 2,16 kg) 3 - 4 g/10 min
Density ISO 1183 0,94 - 0,96 g/cm3
Shore D hardness ISO 868 60 - 64

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527-2/1A/A 850 - 950 MPa
Resistance at the tensile yield point ISO 527-2/1A/50 >20 MPa
Elongation at break to traction ISO 527-2/1A/50 >400 %
Impact resistance Charpy with notch (23ºC) ISO 179-1/1eA 5 - 6 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c HDPE-ESG – Extrusion Recycled High Density Polyethylene

cHDPE-ESG is a black high-density polyethylene (HDPE) pellet developed from post-consumer waste for extrusion and blowing applications. With this material, products with high mechanical resistance are achieved. This material is also available in blue (cHDPE-ESGA).
Possible applications: Rigid blown containers, foil, profiles and other extrusion products.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 °C / 5 kg) 0,1 - 0,5 g/10 min
Density ISO 1183 0,94 - 0,96 g/cm3
Shore D hardness ISO 868 60 - 64

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 800 - 1.000 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >25 MPa
Elongation at break to traction ISO 527-2/1A/50 20 - 40 %
Impact resistance Charpy with notch (23ºC) ISO 179‐1/1eA > 20 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

c HDPE-ESGA – Blue Extrusion Recycled High Density Polyethylene

cHDPE-ESGA is a blue high-density polyethylene (HDPE) pellet developed from post-consumer waste for extrusion and blowing applications. With this material, products with high mechanical resistance are achieved. One of the most frequent applications is the production of blue bottles. This material is also available in black (cHDPE-ESG).
Possible applications: Rigid blown containers, foil, profiles and other extrusion products.

Physical properties

Property Test Typical value Units
Melt Flow Index (MFI)  ISO 1133 (190 °C / 5,0 kg) 0,1 - 0,5 g/10 min
Density ISO 1183 0,94 - 0,96 g/cm3
Shore D hardness ISO 868 60 - 64

Mechanical properties

Property Test Typical value Units
Tensile Modulus ISO 527‐2/1A/1 800-1.000 MPa
Resistance at the tensile yield point ISO 527‐2/1A/50 >25 MPa
Elongation at break to traction ISO 527-2/1A/50 20 - 40 %
Impact resistance Charpy with notch (23ºC) ISO 179‐1/1eA > 20 kJ/m2

Disclaimer:
This product is a recycled material. Although the raw materials used are homogeneous and regular, the properties and/or behavior of the material may vary. Thus, the values indicated in this technical sheet should not be taken as specifications. They are provided in good faith, although Naeco Recycling S.L. makes no guarantees and assumes no responsibility for the information contained in this document being valid and accurate as of the date of publication.

The responsibility for the safety and legality of the use, handling and processing of this material rests with the Buyer, who will be equally responsible for determining whether the material and the information contained in this sheet are appropriate for the application in which the Buyer use it.

The list of possible applications is not exhaustive. It is indicated as a guideline based on accumulated experience.

All properties, except MFI, are determined in the laboratory on ISO type 1-A specimens obtained by injection molding.

Typical values are representative average values.

Download datasheet Download security sheet

Do you need a formulation?

Do not hesitate to contact us if you wish to launch a study of your current materials and learn about a specific development.
Contact with us